|
Installation Method
1. stand with Tower seperately or on building
2. on roof
3. hybrid with solar on street pole
4. DIY tower made by user
Wind Turbine Accident Analysis:
|
Problem
|
Possible ause
|
Solution
|
|
No current charged to battery
|
Generator output wires disconnect
Battery polarity loosen or damaged
|
check generator wires and reconnect them
reconnect battery or change
|
|
No moving
Hard to start
|
Wind speed too low
Generator’s wire in shortcut
Controller damaged
|
Check and change
|
Wind Turbine & Solar Control System
CTJ-A wind turbine auto-controller is special matched equipment with wind turbine. It commutates the AC that generated by wind turbine to DC and then charges to storage battery groups.
CTJ-A autocontroller with a beautiful apperance,simplify indication,easy operation,has an auto-protection function in case of battery converse connection;autoshunt in case of heavy wind(unload). The wind turbine shut down automatically when the battery group volatge gets to upper limit defined; and startup automatically when the voltage s to lower limit required.The key component adopts the high-efficient chip control,the complete machines is intelligent. This system is running safely,steadily, and reliably, working efficiently, and have a long life, which is proved by a large number of experiments.
We also have wind&solar controller,specially for street light, which controller the lamp by time+light.
Technical Parameters:
|
Rated Wind Input Power
|
200W,300W,600W,1KW,2KW,3KW,5KW,10KW
|
|
Rated PV Input Power
|
As you need
|
|
Rated Battery Voltage
|
24V,24V,24V,48V ,96V,220V,220V,380V
|
|
Operation temperature
|
-10℃~40℃
|
|
Operation Model
|
Continuous
|
|
Operation humidity
|
0~80%,no condensing
|
|
Self-Protection
|
automatic Over load protection
|
Wind Turbine & Solar Inverter
Wind turbine & solar invertor transforms DC in battery bank to AC110V/220V/230V for our electrical appliance.
Our invertor has beatiful apperance, direct instrucction,and is operated convinently;it can be protected when over-load, shortcuit; battery over and short storage, uncorrect polarity connection and other protection functions. We use perfect chip，energy saving transformer，so loss rate is very low. It has been proved by much experience to be safely operated, dependable, high efficient, long life.
Technical Parameters:
|
Rated Output Power
|
1KW/2KW/3KW/5KW/10KW
|
|
Rated Input Voltage（VDC ）
|
48V,96V,220V,220V,380V
|
|
No Load loss
|
≤1％Rated Output Power
|
|
Output Wave
|
Pure Sine Wave
|
|
Rated Output Voltage（VAC）
|
110/220/230/240
|
|
Total Harmonic Distortion
|
≤3％
|
|
Output Frequence
|
50/60 Hz±0.05Hz
|
|
Load capacity
|
120% ,1min 200% 10S
|
|
Output Voltage tolerance (VAC）
|
±5%
|
|
Inverter Efficiency
|
92%
|
|
Noise level
|
≤40dB
|
|
Protection Type
|
High battery, low battery, over load ,over temperature, pole-confusion protection for storage battery
|
|
Operation temperature
|
-10～40℃
|
|
Operation humidity
|
0~80%,no condensing
|
|
